Will it work on my bike?
Hello,

As a motorcycle enthusiast, I became frustrated with the lack of a way to keep myself safe & sane when it came to my signals being left on.

Blinker Buddy is a Patent Pending device designed to be installed by you or your local service center. The device is easily mounted in your seat and wired to your bike.

As soon as the signals on your bike are activated, this device goes to work and alerts you that the blinker system on your bike is active, and reminds you to cancel the signal.

It doesn’t run on a timer and there is no need to reset it each time you use your signals. It uses the same 12-volt source as the lights for your signals and has a simple 2-wire installation.

Blinker Buddy generates a mild buzzing that you feel in the seat. The vibration alternates, on and off, with the turn signals. You feel every flash of your blinkers and know, positively, if the signal is on or off.

No more looking down at the little light. No more thinking that you shut them off. Avoid the chance of being hit by someone who thinks you are turning because you forgot to turn your signal off.

Ride Safe

Jerry

 

 

 

Remember to turn those signals OFF...
with Blinker Buddy...

Finally, a sensible solution to monitor turn signal activity.

Common turn signal problems
- You have to look down at the signal indicator light
- You may not be able to see the stock light in daylight
- You may miss the signal indicator blink, even if you do look
- You accidentally, didn't push the reset button in hard enough

The Blinker Buddy Solution
- You no longer worry about any of the above
- No complicated operational procedure involving your brake
- Using it is easy and instantly becomes second nature to you


Blinker Buddy provides you with constant protection and peace of mind.


    • Small
    • Heavy Duty
    • Unobtrusive
    • Custom Made
    • Weather Proof

Blinker Buddy has been developed, specifically, for this application.


Your complete Blinker Buddy kit includes the device, quick disconnect, zip ties and wire crimps. Complete, detailed instructions are included. Help tips are available online for some makes and models.

Installation is simple and easily done on either a stock or custom seat by you or your local service center. Only a 1-1/4"x3-1/2" hole in the bottom of the seat is required. The device is installed through the hole and the foam or seat padding is modified to allow the device to be pushed through it so the device goes through most of the padding but does not come in contact with the underside of the seat covering. A simple two-wire connection completes the installation.

Blinker Buddy will work with a gel pad or some other form of cushion on the seat and the extra padding will very slightly muffle the effect. Blinker Buddy will also work properly with most 4-way flasher setups.


Each unit is precision assembled, tested and has a limited 90 day warranty.      

The current price is $49.95 plus $5.00 shipping and handling to the continental USA only. Shipping outside of the Continental United States will be extra.

 


home | info | FAQ | install | contact | order | warranty | legal | links

JC Whitney - Everything motorcycle
BikeBandit
TigerDirect.com
MCUSA 120x240 Collage